Skip to content

433 Kilometers, One Priority: Keep the Customer’s Production on Track

On November 2, after a customer reported a machine problem, our service team set out at 1 p.m. and drove 433 km—about five hours—to help resolve it before the next day’s production.

2 min read
After-sales service On-site support Customer story
A service engineer inspects a gabion mesh machine at a customer’s workshop

On the afternoon of November 2, a customer told us their machine had developed a problem. The priority was clear: get support to the workshop and help the customer avoid losing the next day’s production.

Our team set out at 1 p.m. The workshop was 433 kilometers away, around a five-hour drive. After arriving, the team went straight to the machine to inspect the issue with the customer.

A service engineer checks the gabion mesh machine at the customer’s workshop
The team began checking the machine as soon as they arrived.

Finding the cause

The on-site checks identified the cause: the supply voltage was too low. Once the issue was understood, the team worked with the customer to address it and check the machine’s operation, with the aim of getting production back on track for the following day.

The service team checks the machine control panel with the customer
Checking the controls and discussing the issue on site.

Support measured in more than kilometers

The 433-kilometer drive is part of the story, but the purpose of the visit was simple: respond when a customer needs help, identify the cause and do what we can to reduce disruption to their production schedule.

Power conditions are one of the practical details worth confirming when installing industrial equipment. If a machine behaves unexpectedly, checking the incoming supply against the machine’s specified requirements can help the customer and service team narrow down the cause. Electrical checks and adjustments should be handled by qualified personnel.

The service engineer and customer review machine controls together
Working through the machine controls together at the workshop.

We appreciate the customer’s cooperation during the visit. For us, after-sales support means taking the production schedule seriously, communicating clearly and helping customers move toward a reliable restart.

The customer and service team check the machine after troubleshooting
A final on-site check after troubleshooting.

Working on a specification?

Send us the mesh opening, wire diameter, working width and the monthly output you are targeting. We will tell you what the machine needs to be — including when the answer is a smaller machine than you expected.

More from the blog

2 min read

Anping Wire Mesh Fair 2026: Three Days at Booth E-95

A photo story from October 22–24 in Anping: the exhibition atmosphere, conversations around gabion mesh machinery and highlights from our E-95 booth.

Exhibition Anping Company news
Read article

Planning a gabion mesh production line?

Share your mesh opening, wire diameter, working width and target output. We will recommend a suitable machine setup or complete line and reply with a quotation within 12 working hours.